PERSONAL CD, CD-R/RW PLAYER
with 45 SECOND ELECTRONIC
ANTI-SKIP PROTECTION
and DIGITAL AM/FM TUNER
OWNER’S MANUAL
HD7100
HD7100_ib_0422.p65
19
22/4/2002, 11:43
IMPORTANT NOTES
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Avoid installing the unit in locations described below:
• Places exposed to direct sunlight or • Dusty places.
loseto heat radiating appliances such • Places subject to constant
as electric heaters.
vibration.
• Humid or moist places.
CLASS 1 LASER PRODUCT
CAUTION
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
INVISIBLE LASER RADIATION
WHEN OPENAND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
This product contains a low power Laser Device.
CAUTION
THIS LASER COMPACT DISC PLAYER FUNCTIONS BY HELP OF INVISIBLE
LASER LIGHT AND IS EQUIPPED WITH SAFETY SWITCHES TO AVOID
EXPOSURE WHEN DOOR IS OPEN AND SAFETY INTERLOCKS ARE
DEFEATED. IT IS DANGEROUS TODEFEAT OR BYPASS SAFETY SWITCHES.
DANGEROUS VOLTAGE
Uninsulated Dangerous Voltage, that may be of sufficient
magnitude to constitute a risk of electric shock to persons is
present within this product's enclosure.
ATTENTION
The Owner's Manual contains important operating and
maintenance instructions.
For your safety, it is necessary to refer to the manual.
This device complies with part 15 of the FCC rules. Operation is subject to the
condition that this device does not cause harmful interference.
2
HD7100_ib_0422.p65
2
22/4/2002, 11:43
LOCATION OF CONTROLS AND INDICATORS
9
10
8
7
11
12
6
5
14
15
16
4
3
17
18
2
1
1.) BBS (Bass Boost) ON/OFF Switch - Switch ‘On’ to increase bass response.
2.) VOLUME Control – Raises or lowers the volume.
3.) PHONES Jack – Connect stereo headphones, included, to this jack.
4.) LINE OUT Jack – To connect this CDplayer to an external amplifier or recording
device. Connection cable not included.
5.)
6.)
CD Skip Reverse / TUNING Down Button.
CD Skip Forward / TUNING Up Button.
7.) Tuner Station Preset Memory Buttons.
8.) LCDDisplay – Shows Track number, Playing time, Joggable status, Program,
Repeat, Random, and Intro modes, Radio Frequencies.
9.) DC Input Jack – Connect anAC adapter (not included) to this jack to use 120V
60 Hz house current.
10.) Battery Compartment (on bottom cabinet).
11.) CD Play/Pause
/ POWER ON Button.
12.) CD Stop / POWER OFF Button.
13.) MODE Button – Selects the playback mode: Repeat 1/All, Random, or Intro.
FM Stereo On/Off.
14.) Radio BAND / ASP ‘On/Off’ Button.
15.) MEMORY Button.
16.) FUNCTION (CD/RADIO) Selector Switch.
17.) CD Door.
18.) OPEN Switch – Slide to the right to unlock and open the CD door.
3
HD7100_ib_0422.p65
3
22/4/2002, 11:43
LCD DISPLAY INDICATORS
2
3 4
5
6
7
8
1
9
12
11
10
1.) FM/AM (Radio Band) Indicators.
2.) Track Number Display – Shows the track which is being played, and the total
tracks on the disc.
3.) PROG (Program) Indicator – Appears when programming tracks or playing
programmed tracks.
4.) PRESET (Radio Station Memory) Indicator.
5.) Repeat 1/ALL Indicators – Appears when the Repeat playback mode is
selected.
6.) FM Stereo Indicator – Appears when FM Stereo station is received.
7.) INTRO Indicator – Appears when Intro playback mode is selected.
8.) RAND (Random) Indicator – Appears when Random playback mode is
selected.
9.) Anti-Skip Protection Indicator – flashing icon indicates Anti-Skip Protection
is activated.
10.) Battery Level Indicator – Lights when batteries need to be replaced.
11.) Radio Frequency Indicators.
12.) Time and Radio Frequency Display – In CD mode shows elapsed time and
total playing time on the disc. In radio mode shows the frequency of the
tuned station.
4
HD7100_ib_0422.p65
4
22/4/2002, 11:43
POWER SOURCE
This CD player can be operated on either 120V 60Hz AC house current with an
optional AC adapter (not included) or on 3V DC (2 "AA" batteries, not included).
BATTERY OPERATION
1.) Open the battery compartment door on
the bottom cabinet by sliding it in the
direction of the arrow and then lifting it
open. To prevent loss, the door cannot
be removed from the unit.
2.) Insert 2 "AA" batteries (not included) into
the compartment. Use alkaline batteries
for longest life. Follow the polarity
markings inside the compartment. If the batteries are inserted incorrectly the
unit will not work.
NOTE:
In order to operate the player on batteries the AC adapter must be disconnected
from the DC IN jack.
BATTERY REPLACEMENT
When the batteries become too weak the battery level indicator “
” appears and
operation may become erratic. When this occurs replace the batteries immediately.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture
(Follow battery manufacturer’s directions.)
5
HD7100_ib_0422.p65
5
22/4/2002, 11:43
AC OPERATION (AC Adapter not included)
Connect the AC adapter to your 120VAC outlet. Then connect the small plug to the
"DC IN 4.5V" jack on the back of the player as shown in the following illustration.
NOTE:
This optional AC adapter, should be rated as follows:
Input :
120V / 60Hz AC.
Output : 4.5V DC 500mA.
The adapter must have a female-type plug with a positive center:
Negative (–)
Positive (+)
• Be sure the adapter is UL listed. If you use a “Universal”-type adapter, be sure to
set the output selector to “DC 4.5V”.
• If the AC adapter will not be used for an extended period of time, remove it from
the wall outlet by pulling on the adapter housing. Do not remove the adapter by
pulling on the cord. Do not touch the AC adapter with wet hands.
6
HD7100_ib_0422.p65
6
22/4/2002, 11:43
OPERATING INSTRUCTIONS
NORMAL PLAYBACK
1.) Connect the headphones to the PHONES jack.
Set the VOLUME control to a low level before
you begin playback.
Set the FUNCTION switch to CD position.
To PHONES Jack
1
2.) Slide the CD Door OPEN switch to the right to
release the lock and open the CDDoor.
2
3.) Place your disc on the center spindle with the
printed label side facing up. Press down gently
near the center hole to make sure the disc is
properly seated on the spindle.
4.) Close the door completely until it locks shut.
5.) Press the Play/Pause
button. “45 SEC”
followed by“00” appear in the display as the player
reads the disc, then playback begins on Track 1.
The Anti-Skip indicator comes on and the playing
time shows in the display.
6.) Adjust the VOLUME and DBBS (Bass Boost)
controls as desired.
PLAY/PAUSE
7.) When all tracks have been played the player stops
and the display shows the total tracks and playing
time on the disc. After approximately 1 minute the
power shuts off and the display goes blank.
DBBS
ON
OFF
VOLUME
To stop playback before the disc ends press the
Stop
button at any time. Press the Stop
button again to shut the power off immediately.
STOP
8.) Slide the CD Door OPEN switch to the right to
open the door and remove your disc. Close the
CD Door and return your disc to its protective
storage case.
OPEN
7
HD7100_ib_0422.p65
7
22/4/2002, 11:43
PAUSE CONTROL
Press the Play/Pause
button during playback to
pause momentarily. The sound stops, the track and
the time display flashes but the disc continues to spin.
Press the Play/Pause
button again to cancel pause
and resume playback. The sound returns and the
display stops flashing.
SKIP/SEARCH CONTROLS
To skip forward or reverse to another track during
playback press the
or
buttons repeatedly until
the desired track number appears in the display.
Playback will begin on the desired track.
To search forward or backward within a track to locate a specific musical passage
press and hold either the
or
buttons. The player moves forward or reverse
at high speed. When you reach the desired point in the track, release the buttons
and normal playback resumes.
REPEAT PLAYBACK
1
3
To repeat a single track:
1.) Press Play/Pause
button to begin playback.
2.) When playback begins press
select the desired track.
or
button to
3.) Press the MODE button once until the Repeat
” indicator appears in the display. The
“
selected track will be repeated indefinitely.
To repeat the entire disc:
1.) Press Play/Pause
2.) When playback begins press the MODE button
twice until the Repeat All “ ” indicator
button to begin playback.
appears in the display. The entire disc will be
repeated indefinitely.
To cancel repeat playback:
1.) Press the Stop button, or;
2.) Press the MODE button until no special mode indicators appear in the display.
8
HD7100_ib_0422.p65
8
22/4/2002, 11:43
INTRO SCAN
This feature plays only the first 10 seconds of each track on the disc.
1.) Press the Stop button to stop the disc and then
press MODE button three times. ‘INTRO’ indicator
flashes in the display.
2.) Press the Play/Pause
button. The “INTRO”
indicator stops flashing and remains ‘On’. The player
begins to play track 1 and plays just the first 10
seconds of each track on the disc. When the first
10 seconds of each track has been played, the player
stops.
To cancel Intro Scan press the Stop button or press the MODE button until none
of the special playback mode indicators appear in the display.
RANDOM PLAYBACK
Use Random playback to play all the tracks on a disc in a random order selected
by the CD player.
1.) Press Play/Pause
button to begin playback.
2.) When playback begins press the MODE button
4 times until the “RAND” indicator flashes in the
display.
3.) Press the
button. The “RAND” indicator stop
flashing and remains on. The player randomly
selects the first track for playback and continues
randomly selecting tracks until every track on the
disc has been played once. After all tracks have
been played the player stops.
To cancel Random playback, press the Stop button, or press the MODE button
until no special mode indicators remain in the display.
9
HD7100_ib_0422.p65
9
22/4/2002, 11:43
PROGRAMMED PLAYBACK
You can program the player to play only the tracks that you want to hear, in the
specific order that you want to hear them. Up to a total of 24 tracks can be
programmed. You may program certain tracks to play more than once if desired.
IMPORTANT: The player can only be programmed when it is in the Stop mode
and the total number of tracks and playing time appear on the display. If the display
is blank press the POWER ON
button to start the disc. When playback begins
press the Stop button. If the disc was playing, press the Stop button so that
the total tracks and playing time appear on the display.
1.) While the total tracks and playing time appear on
the display press the MEMORY button. "PROG"
indicator and Program No. "P - 01" appears.
2.) Press
or
button until the first track to be
programmed appears in the display.
Example: Track # 7.
3.) Press the MEMORY button again to enter the
selected track in the memory. The track indicator
returns to a "00" and the Program No. advances to
"P - 02".
4.) Repeat Steps 2 and 3 until you have entered up to a total of 24 tracks in the
memory.
5.) Press the Play/Pause
button to begin
programmed playback. The “PROG” indicator
remains in the display. The player will play the tracks
you selected in the programmed order. When the
last track has played the player stops and the total
tracks and playing time appear.
6.) To cancel programmed playback press the Stop button twice. The program
will also be canceled if the CDDoor is opened or if the power is interrupted.
10
HD7100_ib_0422.p65
10
22/4/2002, 11:43
ELECTRONIC ANTI-SKIP PROTECTION
This CDplayer is equipped with an automatic 45 second ElectronicAnti-Skip Memory
and an Anti-Rolling Mechanism that will eliminate virtually all skipping during most
active uses. When you press the Play/Pause
button to begin playback the
player immediately begins to store 45 seconds of music in a solid state memory
that is impervious to shock. The player is always reading the disc 45 seconds
ahead of the music you are hearing and storing that information in the memory. If
the player is subjected to shock or bumps of less than 45 seconds duration you will
not notice them at all. If the bumps last longer than 45 seconds the anti-skip memory
may be depleted and the player may skip or stop.
When playback begins the Anti-Skip indicator
appear in the display. When all 5 "bars"
comes on and a series of "bars"
appear the Anti-Skip memory
contains 45 seconds of music and is "full". If the player is bumped or shaken the
"bars" may start to disappear as the memory is depleted. If all 5 "bars" disappear
the memory is empty and the player may skip if the bumps continue. When the
bumps stop the memory starts to fill up again and all 5 "bars" will reappear.
The Electronic Anti Skip System does use additional battery power. Therefore if
you are using this player in a stable location where it will not be subject to bumps
and shocks, press the ASP button to switch the anti-skip circuitry ‘Off’. The Anti-
Skip indicator will disappear. This will reduce battery drain and prolong battery life.
Note: Each time you begin playing a disc the anti-skip system will turn ‘On’
automatically.
11
HD7100_ib_0422.p65
11
22/4/2002, 11:43
LISTENING TO RADIO
5
8
1
2
3
7
6
1.) Slide the FUNCTION Switch to RADIO position.
2.) Press the BAND Button to select the desired band, AM or FM.
3.) Tune to desired station by pressing the TUNING Up
Each time the button is pressed, the frequency changes.
or
Down button.
4.) To search for a station quickly (automatic tuning), keep the TUNING Up
or
Down button pressed until the frequencystarts to change rapidlythen release
the buttons. The tuner will stop on the first strong station. Repeat until you find
the desired station.
ST
5.) If you tune into a FM stereo station, "
" will show in the Display. If the FM
reception is noisy, press MODE button to turn stereo ‘OFF’.
6.) Adjust the VOLUME control to your listening preference.
7.) If you prefer more bass, slide the DBBS switch to ‘ON’ position.
8.) To turn off the radio, press POWER OFF button to shut power ‘Off’.
ANTENNA INFORMATION
FM – The stereo headphone cable serves as the FM antenna when listening to
FM stations. Make sure that the headphone cable is unwound completely in order
to provide the best reception.
AM – TheAM antenna is located inside the cabinet of the CDplayer. IfAM reception
is weak, try changing the position of the CD player itself until the internal antenna is
pointing in the general direction of the radio transmitter. This should provide
improved reception.
12
HD7100_ib_0422.p65
12
22/4/2002, 11:43
PRESETTING STATIONS IN MEMORY
Up to 10 AM and 10 FM stations can be stored into the Preset memories. They will
remain in memory as long as the batteries are installed.
1.) Slide the FUNCTION switch to RADIO position.
2.) Press the BAND button to select AM or FM band, press the
tune a station.
or
button to
3.) Press the MEMORY button – the PROG indicator
blinks.
4.) While the PROG indicator is blinking: Press one
of the Preset buttons to store that station in Presets
M1 – M5. Example: M4.
5.) To store stations in Presets M6 through M10, tune to the desired station, press
the MEMORY button, press the M+5 button and then one of the Preset buttons.
Example: To store a station in Preset M7, press buttons “M+5” and “M2”.
Note: You must press a Preset button within 5 seconds while the PROGindicator
is blinking, otherwise the station will not be memorized.
NOTE: Before you disconnect the power (AC and Battery) of the set, make sure to
press POWER OFF button to turn power ‘Off’, then you have approximately 30
seconds to reconnect the power. Otherwise, the memories may be lost and need
to be re-programmed.
13
HD7100_ib_0422.p65
13
22/4/2002, 11:43
TO RECALL PRESET STATIONS
1.) Set the FUNCTION switch to the RADIO position.
2.) Press the BAND button to select AM or FM band.
3.) Press one of the PRESET buttons to select stations stored in Presets M1
through M5 or press the M+5 Preset button and then one of the Preset buttons
to select stations stored in Presets M6 through M10.
4.) To change a preset station, enter a new station into the memory you wish to
change. The previously memorized station is replaced by the new station.
CONNECTION TO AN EXTERNAL AUDIO SYSTEM
You can connect this CD player to a home stereo system, receiver, amplifier, or
recorder if desired. Connect the LINE OUT jack of this CD player to the Left/Right
AuxiliaryInputs, Line Inputs, or Record Inputs of the external device. The connection
cable is NOT included. Set the DBBS(Bass Boost) switch of this CD player to the
“OFF” position. Be sure to follow the external source connection instructions for
the other equipment as well.
14
HD7100_ib_0422.p65
14
22/4/2002, 11:43
CARE AND MAINTENANCE
CLEANING THE CABINET
Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak
solution of neutral detergent and water, and then wipe clean.
CLEANING THE LENS
A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not
work. Open the disc cover and clean the lens as follows:
DUST OR DRY PARTICLES
Using a camera lens brush/blower, blow on the lens
several times, then wipe it lightly with the brush to remove
dust. Then, blow on the lens once more.
FINGERPRINTS
To remove fingerprints from the lens, use a cotton swab
starting in the middle and working to the outside edge.
Use only very light pressure on the lens to avoid forcing
it out of alignment.
CLEANING THE DISC
When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the
center out.
NOTE:
Do not use solvents such as benzine, thinner, commercially available cleaners
or anti-static spray intended for analog discs.
15
HD7100_ib_0422.p65
15
22/4/2002, 11:43
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before calling for
service.
SYMPTOM
CAUSE
SOLUTION
Unit will not turn on. Weak or dead
batteries.
Replace batteries.
CD compartment not
closed.
Disc inserted incorrectly. Reinsert disc correctly.
Dirty or defective disc. Try another disc.
Moisture or condensation Disc: wipe with soft cloth.
Close CD compartment.
Disc will not play.
on disc or lens.
Lens: see page 15.
‘Care and Maintenance’
Reinsert headphone plug
correctly.
No sound from
headphones.
Headphone plug not
inserted correctly.
VOLUME controls set to
minimum.
Raise volume controls on
main unit and/or headphone
cable.
Weak batteries.
Replace batteries.
Try another disc.
Defective disc.
Erratic playback.
Radio no sound
Dirty or defective disc.
Clean or replace disc.
FUNCTION switch is not Set FUNCTION switch to
set to RADIO position.
FM: Headphone cord is
not extended.
RADIO position.
Extend headphone cord
fully.
Radio reception is
noisy or weak.
AM: Unit is not positioned Rotate unit until best
correctly. reception is obtained.
SERVICE
FOR ADDITIONAL SET-UP OR OPERATINGASSISTANCE
PLEASE CALL:
1-800-898-9020
FOR CUSTOMER SERVICE, PLEASE WRITE TO:
Emerson Radio Corp.
Consumer Affairs Dept.
1901 Diplomat Drive,
Farmers Branch, TX 75234.
16
HD7100_ib_0422.p65
16
22/4/2002, 11:43
EMERSON RADIO CORP.
LIMITED WARRANTY
What does this warranty cover ? Any manufacturing defects in original material, including original parts and
workmanship, under normal use and conditions.
For how long? For a period of ninety (90) days from the date of original purchase in the U.S.
What will we do ? If you need service under this Warranty, and you provide us with the dated proof of
purchase, we will provide repair service at no charge for labor and parts at an authorized Depot Repair Facility,
or replace the product in our discretion.
How do you make your warranty claim ? If it becomes necessary to repair your unit, you can obtain the name
and mailing location of a Depot Repair Facility by dialing 1-800-695-0098. You should pack your unit in a well-
padded heavy corrugated box, enclose your check or money order payable to the Depot Repair Facility in the
amount of $9.00 to cover the return shipping and handling costs, and enclose a copy of your proof of purchase
(warranty service will not be provided without a dated proof of purchase). Finally, you should ship the unit
prepaid via UPS or parcel post (insured).
What does your warranty not cover ? Your warranty does not cover the following :
•
•
•
•
•
•
•
•
•
•
•
Damage from negligence, misuse, abuse, accident, or failure to follow operating instructions.
Use of product in a commercial application or rentals.
Changes or repairs by anyone other than an authorized Depot Repair Facility.
Damage because your unit is improperly connected to the equipment of other manufacturers.
Unit on which the serial number has been defaced, modified or removed.
Damage to equipment not properly connected to the product.
Cost incurred in shipping your unit to and from an authorized Depot Repair Facility.
Ordinary adjustments which you can perform as outlined in the owner’s manual.
Signal reception problems caused by external antenna or cable systems.
Products purchased, used, serviced, or damaged outside of the United States.
Damage to compact discs or cassettes.
What other limitations apply to your warranty ?
THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER
ANDDOESNOT EXTENDTO SUBSEQUENT OWNERS OF THE PRODUCT. THIS WARRANTY IS VALID
ONLY INTHE UNITEDSTATES OFAMERICA.ANYAPPLICABLE IMPLIEDWARRANTIES, INCLUDING
THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF THE
EXPRESSED WARRANTY AS PROVIDED ABOVE BEGINNING WITH THE DATE OF ORIGINAL
PURCHASE AT RETAILANDNO WARRANTIES, WHETHER EXPRESSED OR IMPLIED, SHALLAPPLY
TO THE PRODUCT THEREAFTER. WE MAKE NO WARRANTYAS TO THE FITNESS OF THE PRODUCT
FOR ANY PARTICULAR PURPOSE OR USE.
THE EXTENT OF OUR LIABILITY UNDER THIS LIMITED WARRANTY IS THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND IN NO EVENT WILL OUR LIABILITY EXCEED THE
PURCHASE PRICE PAID BY THE PURCHASER OF THE PRODUCT. UNDER NO CIRCUMSTANCES
WILL WE BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT, INCIDENTAL, SPECIAL, OR
CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS
PRODUCT.
How does state law apply to your warranty ?
THIS WARRANTYGIVESYOU SPECIFIC LEGAL RIGHTS, BUTYOU MAYALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATIONS ON IMPLIED
WARRANTIES OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGE,
SO THESE RESTRICTIONS MAY NOT APPLY TO YOU.
AU898F
17
HD7100_ib_0422.p65
17
22/4/2002, 11:43
EMERSON RADIO CORP.
EMERSON
PART NO. :16-2863
204-01
PRINTED IN CHINA
HD7100_ib_0422.p65
18
22/4/2002, 11:43
|