Portable CD Player
OWNER’ S MANUAL
DTE110
Copyright 2005 Viacom International Inc. All Rights Reserved. Nickelodeon,
Nick Jr., Nicktronics, Dora the Explorer and all related titles, characters and
logos are trademarks of Viacom International Inc.
31/3/2005, 15:41
IMPORTANT NOTES
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Avoid installing the unit in locations described below:
Places exposed to direct sunlight or
close to heat radiating appliances such
as electric heaters.
Dusty places.
Places subject to constant
vibration.
Humid or moist places.
CLASS 1 LASER PRODUCT
CAUTION
INVISIBLE LASER RADIATION
WHEN OPENAND INTERLOCKS
DEFEATED.
CLASS 1 LASER PRODUCT
APPAREIL LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
AVOID EXPOSURE TO BEAM
This product contains a low power Laser Device.
CAUTION
THIS LASER COMPACT DISC PLAYER FUNCTIONS BY HELP OF INVISIBLE
LASER LIGHT AND IS EQUIPPED WITH SAFETY SWITCHES TO AVOID
EXPOSURE WHEN DOOR IS OPEN AND SAFETY INTERLOCKS ARE
DEFEATED. IT IS DANGEROUS TO DEFEAT OR BYPASS SAFETY SWITCHES.
DANGEROUS VOLTAGE
Uninsulated Dangerous Voltage, that may be of sufficient
magnitude to constitute a risk of electric shock to persons is
present within this product’s enclosure.
ATTENTION
The Owner’s Manual contains important operating and
maintenance instructions.
For your safety, it is necessary to refer to the manual.
This device complies with part 15 of the FCC rules. Operation is subject to the
condition that this device does not cause harmful interference.
1
Emerson Radio Corp. has produced this audio product under
license from Nickelodeon. We have taken great care to
make sure your unit was in perfect working order when it left
our factory.
It has been designed to give you many years of enjoyment
and trouble free operation. Read this manual before
operating this unit to become familiar with its features. In the
event you require technical assistance, please contact the
Emerson Radio Customer Service hotline at 1-800-898-9020.
Retain this manual for future reference.
NOTES:
• Please avoid using this unit in places of high temperature
or humidity over prolonged periods of time as damage
may occur.
• Exposure to direct sunlight in places such as car interiors
may cause the unit to become warped and/or lead to
malfunctioning.
• Avoid using or storing this unit in dusty or sandy locations.
For future reference, record the serial number in the space
provided.
Model No: DTE110
Serial No:________________
2
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of
your musical enjoyment. Now it’s time to consider how you can maximize the fun and
excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your equipment
by playing it at a safe level. One that lets the sound come through loud and clear without
annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer
and the Electronic Industries Association’s Consumer Electronics Group recommend you
avoid prolonged exposure to excessive noise. This list of sound levels is included for your
protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT
EXPOSURE:
We
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
WantYou
LISTENING
ForALifetime
100
120
140
180
Rocket launching pad
EIA
EST. 1924
Information courtesy of the Deafness Research Foundation.
3
LOCATION OF CONTROLS
1 2 3
4
5
6
7
8
9
10
11
12
13 14 15 16 17
1. ESP Button
10. Display
2. MODE Button
11. DBBS (Bass Boost) Switch
3. CD OPEN Button
12. PLAY/PAUSE (
ON Button
) /POWER
4. PROG (Program) Button
13. STOP (I)/ POWER OFF
5. DC 4.5V Jack (Side of Unit)
Button
+
–
14. SKIP/SEARCH (
15. SKIP/SEARCH (
16. VOLUME Control
) Button
) Button
6. CD Compartment
7. Battery Compartment (Bottom
of Unit)
17. Headphones Jack (Side of
Unit)
8. LINE OUT Jack (Side of Unit)
9. HOLD Switch
4
POWER SOURCES
This CD player requires either two (2) “AA” cell batteries (not included) or the AC
adapter (not included).
BATTERY INSTALLATION
The battery indicator (
replacing.
) will appear in the CD display when the batteries need
1. Open the CD Compartment, then open the battery
compartment door by pressing in on the tab and then
lifting it. To prevent the possibility of losing the
cover, it cannot be removed.
2. Insert two (2) “AA” cell batteries (not included)
according to the polarity diagram inside the battery
compartment. Alkaline batteries are recommended for the longest playing time.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with
fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or
injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer’s directions.)
AC OPERATION
To operate the unit using AC power, connect the AC adapter (not included) to a 120V,
60Hz AC outlet only. Plug the small end into the DC 4.5V jack on the side of the unit
and connect the other end into the AC outlet. The batteries are automatically
disconnected when the AC adapter is used.
CAUTION: When not using AC power, disconnect the AC adapter from the wall
outlet by pulling the plug (not the cord). Do not touch the AC adapter with wet
hands. Fully insert the plug without exposing any part of the blade.
Input: 120V 60Hz AC
Output: 4.5V DC, 500 mA.
r, UL Listed.
Plug: 1.7 mm Female Type with Positive Cente
Negative ( )
Positive (+)
5
OPERATION
TURNING POWER ON/OFF
BASS BOOST
1
1
2
1
To emphasize the bass, slide the To turn the unit on, press the
DBBS switch to the ON position. For
normal bass, slide the DBBS switch to
the OFF position.
PLAY/PAUSE (
button ‚.
To turn unit off, Press the STOP (I)
)/POWER ON
/POWER OFF button ƒ.
HOLD SWITCH
AUTO POWER OFF
1
When the unit is stopped (Standby
mode) for approximately one minute,
the power will automatically turn off.
To prevent accidentally pressing a
button while walking, etc., slide the
HOLD switch to the ON position;
“HOLD” will appear in the display.
When you want to use the buttons,
slide to the OFF position; “HOLD” will
disappear from the display.
Sound Through a Home Audio System
By using a home audio connection cable (not included), superb sound can be
heard through your home audio system. Before making any connections, turn off
the power to all equipment.
Plug a connection cable (not included) between the LINE OUT jack on the side
of the CD player and the amplifier’s AUX or CD input jack. (Do not connect it to
the amplifier’s PHONO jack.)
NOTE: If the unit interferes with TV reception, move the unit away from the TV
or turn off the power to this unit.
6
CD OPERATION
TO PLAY A CD (THIS UNIT CAN PLAY STANDARD OR CDR/RW
DISCS)
2
1
While the unit is off, press the
Open the CD compartment lid by
pressing the CD OPEN button. Gently
press a disc, label side up, onto the
spindle until it locks in place. Close the
CD compartment lid. Insert headphones
into the Headphones jack.
PLAY/PAUSE (
to start playback. To pause PLAYBACK,
press the PLAY/PAUSE ( )/POWER
)/POWER ON button
ON button again, the display will blink.
Press once again to resume playback.
4
3
3
1
2
Adjust the VOLUME control ‚ and DBBS When the disc is through playing, it will stop.
Press the STOP (I)/POWER OFF button to
stop the disc before it is finished; the total
number of tracks and playing time will
appear. Press the STOP (I)/POWER OFF
button again while in the stop mode to turn
the unit off or wait approximately 60 seconds
and the unit will automatically turn off.
switch ƒ as desired. To skip forward or
backward through the tracks on the disc,
press the SKIP/SEARCH
„ or
ꢀ
button. To search forward or backward
through the tracks on the disc, press and hold
the SKIP/SEARCH
„ or
ꢀ button.
NOTES:
• This unit is capable of playing standard CDs or 3” singles; no adapter is required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will
show “disc”.
• As each track is played, the track number and elapsed time are shown in the display.
• To remove the disc, open the CD Compartment, hold the edge of the CD and gently
press the center spindle and lift the CD.
• The maximum time of a CD is 74 minutes for this unit.
• “OPEN” will appear in the display when the CD Door is opened.
• This unit will play standard or CDR/RW discs.
7
CD OPERATION (CONTINUED)
MOTION PROOF ELECTRONIC ANTI-SHOCK SYSTEM
This CD player has a built-in Anti-Shock System that cuts down on CD skipping,
which is useful when using the CD player in the car or while jogging/walking.
Follow the steps below to activate and understand the Anti-Shock System:
2
1
With a CD inserted, press the
Open the CD compartment lid by
pressing the CD OPEN button. Gently
press a disc, label side up, onto the
spindle until it locks in place. Close
the CD compartment lid. Insert
headphones into the Headphones
jack.
PLAY/PAUSE (
)/POWER ON
button to turn the unit on.
4
3
Within a few seconds, the Anti-Shock
indicator will fill to indicate music
signals are stored in memory.
The Anti-Shock System will start
automatically, the sound will mute for a
moment and the display will show the
Anti-Shock indicator with no bars in it.
CONTINUED ON THE NEXT PAGE
8
CD OPERATION (CONTINUED)
6
5
If the CD player is subject to vibration If all the bars disappear and the CD
during playback, the bars will player is subject to immediate vibration,
disappear one by one. During the the unit may skip.
vibration, the music should continue to
play the signals stored in the memory
until the CD player can read the music
data properly from the disc. At this
time, the indicator will probably show
fewer bars indicating the music signals
stored in memory are low.
8
7
If no more vibration occurs, the To turn the Anti-Shock System off,
music signals are once again stored press the ESP button.
into the memory and the indicator To turn the Anti-Shock System on,
returns to full. When the memory is press the ESP button again.
full, the top bar will blink and the
disc rotation speed will drop to save
power consumption.
NOTES:
•
When the CD player is used in a stable location, turn the Anti-Shock System
off by pressing the ESP button. When the Anti-Shock System is Off, battery
consumption is less.
•
The Anti-Shock System provides for continuous sound output when unit is
subject to vibration, but it will not correct errors, such as a defective or dirty
CD.
9
CD OPERATION (CONTINUED)
TO REPEATEDLY PLAY BACK ONE TRACK
2
1
4
1
2
3
1
3
With a CD inserted, press the The unit will then play the same track
over and over until the STOP
(I)/POWER OFF button ‚ is pressed.
Adjust the VOLUME control ƒ and
DBBS switch „ as desired.
PLAY/PAUSE (
button ‚ to turn the unit on, then select
a track using the SKIP/SEARCH
or „ button. Press the MODE
)/POWER ON
ƒ
button ꢀ once; the Repeat 1 indicator
1 will appear in the display.
TO REPEATEDLY PLAY BACK ALL TRACKS
1
2
2
1
2
1
3
With a CD inserted, press the
PLAY/PAUSE ( )/POWER ON
button ‚ to turn the unit on. Press the
The unit will then play all the tracks on
the CD over and over until the STOP
(I)/POWER OFF button ‚ is pressed.
Adjust the VOLUME control ƒ and
DBBS switch „ as desired.
MODE button ƒ twice; the Repeat All
ALL
indicator
display.
will appear in the
TO CANCEL OR STOP REPEAT PLAYBACK
• TO STOP REPEAT PLAYBACK, press the STOP (I)/POWER OFF button once.
• TO CANCEL REPEAT PLAYBACK, press the MODE button until no repeat
indicator appears in the display. The unit will continue normal playback.
10
CD OPERATION (CONTINUED)
INTRO PLAY
2
1
3
2
1
2
1
3
With a CD inserted, press the
PLAY/PAUSE (
button ‚ to turn the unit on and press
Press the PLAY/PAUSE (
)/POWER ON ON button ‚ to begin playback. The unit
)/POWER
will play the first 10 seconds of each
the STOP (I)/POWER OFF button ƒ track. Adjust the VOLUME control ƒ
to stop auto playback. Press the MODE and DBBS switch „ as desired. Press
button „ three times; the INTRO
the STOP (I)/POWER OFF button ꢀ
indicator will appear in the display.
to stop Intro playback.
TO CANCEL Intro Play, press the Mode button twice.
TO RANDOMLY PLAY BACK A CD
1
2
3
2
1
2
1
3
With a CD inserted, press the
PLAY/PAUSE (
button ‚ to turn the unit on and press
Press the PLAY/PAUSE (
)/POWER ON ON button ‚ to begin playback. The
)/POWER
unit will play all the tracks in random
the STOP (I)/POWER OFF button ƒ order. Adjust the VOLUME control ƒ
to stop auto playback. Press the and DBBS switch „ as desired. When
MODE button „ four times; the
all the tracks have been played, the
SHUFF indicator will appear in the unit will stop. Press the STOP
display.
(I)/POWER OFF button ꢀ to stop
Random playback.
TO CANCEL Random Play, press the Mode button once.
11
CD OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
2
1
2
3
2
1
1
You cannot program a disc during
playback. If the disc is playing, press the
STOP (I)/POWER OFF button ‚ to first
stop playback and then follow the
programming steps as follows. Press the
PROG button ƒ; the track number and
PROG indicator will blink in the CD display.
Select the first track to be played back
using the SKIP/SEARCH ‚ or
ƒ button, then press the PROG button
„ again. Repeat this step to program
additional tracks up to a maximum of
20 tracks.
4
3
2
1
2
1
3
To skip forward or backward through
the programs, press the SKIP/
Press the PLAY/PAUSE
/POWER ON button ‚ to begin
(
)
SEARCH
‚ or
ƒ button.
Programmed playback and adjust the
VOLUME control ƒ and DBBS switch When the disc is through playing, it will
stop.
„ as desired.
NOTES:
•
•
•
Press the STOP (I)/POWER OFF button to stop the disc before it is finished.
As each program is played, the track number is shown in the display.
To clear the memorized program: press the STOP (I)/POWER OFF button
again while in the stop mode, wait approximately 60 seconds and the unit will
turn off or open the CD compartment.
•
•
Programming is the ability to preselect the order in which a series of tracks
will be played.
Each track may be stored in the program memory as many times as desired
(up to 20 tracks).
12
CARE AND MAINTENANCE
Caring for Compact Discs
•
Treat the compact disc carefully. Handle the
compact disc only by its edges. Never allow your
fingers to come in contact with the shiny,
unprinted side of the compact disc.
•
•
Do not attach adhesive tape, stickers, etc. to
the compact disc label.
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use
detergents or abrasive cleaners to clean the compact disc. If necessary, use a
CD cleaning kit.
•
If a compact disc skips or gets stuck on a section of the disc, it is probably dirty
or damaged (scratched).
Z
•
•
When cleaning the compact disc, wipe in straight lines from the
center of the compact disc to the outer edge of the compact disc.
Never wipe in circular motions.
This unit is designed to play only compact discs bearing the identification logo
as shown here. Other compact discs may not conform to the CD standard and
may not play properly.
•
•
Compact discs should be stored in their cases after each use to avoid
damage.
Do not expose compact discs to direct sunlight, high humidity, high
temperatures, or dust, etc. Prolonged exposure or extreme temperatures can
warp the compact disc.
•
Do not stick or write anything on either side of the compact disc. Sharp writing
instruments, or the ink may damage the surface.
Cleaning the unit
•
•
•
To prevent fire or shock hazard, disconnect your unit from the AC power
source when cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
Mild soap and a damp cloth may be used on the front panel.
13
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before
calling for service.
SYMPTOM
Unit will not
CAUSE
SOLUTION
Weak or dead batteries Replace batteries and insert
turn on.
or inserted incorrectly. correctly.
Weak or dead Re-
chargeable batteries.
AC adapter
not connected.
CD compartment
not closed.
Recharge or replace
batteries (if used).
Check AC adapter
connection.
Disc will not play.
Close CD compartment.
Disc inserted
incorrectly.
Dirty or defective
disc.
Reinsert disc correctly.
Try another disc.
Moisture
condensation
on disc.
Wipe disc with soft
cloth.
Erratic CD playback.
Dirty or defective
disc.
Clean or replace disc.
No sound from
headphones.
Headphone
plug not inserted
correctly.
Reinsert headphone
plug correctly.
VOLUME control
set to minimum.
Weak batteries.
Defective disc.
ESP is not activated.
Increase volume.
Replace batteries.
Try another disc.
Press the ESP button.
ESP not working.
14
EMERSON RADIO CORP.
LIMITED WARRANTY
Emerson Radio Corp. warrants manufacturing defects in original material, including original
parts and workmanship, under normal use and conditions, for a period of ninety (90) days
from the date of original purchase in the U.S. With your dated proof of purchase, we will
provide repair service at no charge for labor and parts at an authorized Depot Repair
Facility, or replace the product in our discretion. For repair or replacement, pack your unit in
a padded box, enclose your check or money order payable to Emerson Radio Corp. in the
amount of $9.00 (not required by California residents) to cover shipping and handling costs,
and enclose a copy of your proof of purchase. Send your unit to:
Emerson Radio Corp.
1901 Diplomat Drive
Farmers Branch, TX 75234
This warranty does not cover damage from negligence, misuse, abuse, accident, failure to
follow operating instructions, commercial use, rental, repairs by an unauthorized facility, or
products purchased, used, serviced or damaged outside of the United States.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
AU898M
15
|