Snapper 1694923 User Manual

Bumper Kit

Mfg. No. 1694923

Installation

Instructions

Kit Contents:

Ref. Part No. Qty. Description

1731989A

1931277

1930591

Bumper Assembly

Nut, Hex, Flange Lock, 5/16-18

Capscrew, Flange Lock,

5/16-18 x 3/4

Figure 1. Contents

This kit is to install a bumper onto a Regent / 500 /

2500 / LT-200 Series Lawn Tractor.

WARNING

Before beginning any service work turn off the

PTO, set the parking brake, turn off the ignition,

and disconnect the spark plug wire(s).

Kit Installation

Figure 2. Head Light

A. Socket and Bulbs

B. Bezel

HOOD REMOVAL

1. Open the hood.

2. Remove the socket and bulbs (A, Figure 2) by twist-

ing the socket counterclockwise and pulling it out of

the bezel (B). Repeat on other side.

3. Rock the hood back slightly and lift hood and grill

assembly (B, Figure 3) off pivot posts (C). Set hood

on clean 4 x 4’s or workbench.

Figure 3. Hood Removal and Installation

A. Hinge Post

B. Hood and Grill Assembly

C. Pivot Post

D. Stop